AudioCodes Mediant 800B User Manual page 311

User's Manual
Parameter
Web: Reliable Held Tone Source
CLI: reliable-heldtone-source
[IPProfile_ReliableHoldToneSource]
Web: Play Held Tone
CLI: play-held-tone
[IpProfile_SBCPlayHeldTone]
Web: Remote Hold Format
CLI: remote-hold-Format
[IPProfile_SBCRemoteHoldFormat]
Web: Remote Replaces Behavior
CLI: sbc-rmt-replaces-behavior
[IpProfile_SBCRemoteReplacesBehav
ior]
Version 6.8
SBCUserRegistrationTime.
Enables the device to consider the received call-hold request
(re-INVITE/UPDATE) with SDP containing 'a=sendonly', as
genuine.

[0] No (default) = Even if the received SDP contains
'a=sendonly', the device plays a held tone to the held
party. This is useful in cases where the initiator of the call
hold does not support the generation of held tones.

[1] Yes = If the received SDP contains 'a=sendonly', the
device does not play a held tone to the held party (and
assumes that the initiator of the call hold plays the held
tone).
Note: The device plays a held tone only if the 'SBC Play
Held Tone' parameter is set to Yes.
Enables the device to play a held tone to the held party. This
is useful if the held party does not support playing a local
held tone, or for IP entities initiating call hold that do not
support the generation of held tones.

[0] No (default)

[1] Yes
Note: If this parameter is set to Yes, the device plays the
tone only if the 'SBC Remote Hold Format' parameter is set
to transparent, send-only, send only 0.0.0.0, or not
supported.
Defines the format of the SDP in the re-INVITE for call hold
that the device sends to the held party.

[0] Transparent = Device forwards SDP as is.

[1] Send Only = Device sends SDP with 'a=sendonly'.

[2] Send Only Zero ip = Device sends SDP with
'a=sendonly' and 'c=0.0.0.0'.

[3] Inactive = Device sends SDP with 'a=inactive'.

[4] Inactive Zero ip = Device sends SDP with 'a=inactive'
and 'c=0.0.0.0'.

[5] Not Supported = Used when remote side cannot
identify a call-hold message. The device terminates the
received call-hold message (re-INVITE / UPDATE) and
sends a 200 OK to the initiator of the call hold. The
device plays a held tone to the held party if the 'SBC Play
Held Tone' parameter is set to Yes.
Enables the device to handle an incoming INVITE with the
Replaces header for this SIP entity (which does not support
this header). The Replaces header is used to replace an
existing SIP dialog with a new dialog such as in call transfer
or call pickup

[0] Transparent = (Default) SIP entity supports the
Replaces header. The device forwards the received
INVITE with the Replaces header as is to the SIP entity.

[1] Handle Locally = The SIP entity does not support
INVITE with the Replaces header. The device terminates
the received INVITE with the Replaces header and
establishes a new call between the SIP entity and the
311
19. Coders and Profiles
Description
Mediant 800B Gateway and E-SBC