Quality Of Experience Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
IDS Policy Table
Web: IDS Policy Table
[IDSPolicy]
IDS Rule Table
Web: IDS Rule Table
[IDSRule]
IDS Match Table
Web: IDS Match Table
[IDSMatch]
54.5

Quality of Experience Parameters

The Quality of Experience (QoE) parameters are described in the table below.
Parameter
SEM Parameters
Web: Server IP
CLI: configure voip/qoe
configuration/server-ip
[QOEServerIP]
Version 6.8
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page 147.
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page 147.
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For a detailed description of this table, see ''Assigning IDS Policies'' on
page 151.
Table 54-30: Quality of Experience Parameters
Defines the IP address of AudioCodes primary Session Experience
Manager (SEM) server to where the quality experience reports are
sent.
Note: For this parameter to take effect, a device reset is required.
54. Configuration Parameters Reference
Description
Description
745 Mediant 800B Gateway and E-SBC