AudioCodes Mediant 800B User Manual page 224

Parameter
Action Subject
CLI: action-subject
[CallSetupRules_ActionSubject]
Action Type
CLI: action-type
[CallSetupRules_ActionType]
Action Value
CLI: action-value
[CallSetupRules_ActionValue]
User's Manual
Defines the element (header, parameter, or body) upon
which you want to perform the action.
The valid value is a string of up to 100 characters (case-
insensitive).
Examples:

header.from contains '1234' (SBC calls only)

param.call.dst.user (called number)

param.call.src.user (calling number)

param.call.src.name (calling name)

param.call.redirect (redirect number)

param.call.src.host (source host)

param.call.dst.host (destination host)
Defines the type of action to perform.

[0] Add (default) = Adds new message header,
parameter or body elements.

[1] Remove = Removes message header, parameter, or
body elements.

[2] Modify = Sets element to the new value (all element
types).

[3] Add Prefix = Adds value at the beginning of the string
(string element only).

[4] Add Suffix = Adds value at the end of the string
(string element only).

[5] Remove Suffix = Removes value from the end of the
string (string element only).

[6] Remove Prefix = Removes value from the beginning
of the string (string element only).

[20] Exit = Stops the Rule Set ID and returns a result
("True" or "False").

[21 Run Rules Set = Performs a different Rule Set ID,
specified in the 'Action Value' parameter (below).
Defines a value that you want to use in the action.
The valid value is a string of up to 300 characters (case-
insensitive).
Examples:

'+9723976'+ldap.attr.alternateNumber

'9764000'

ldap.attr.displayName

true (if the 'Action Type' is set to Exit)

false (if the 'Action Type' is set to Exit)
224
Mediant 800B Gateway and E-SBC
Description
Document #: LTRT-10278