Custom Print Quality Adjustment - MUTOH Valuejet VJ-2638 Operation Manual

VJ-2638/1638/1638W OPERATION MANUAL
3.6.2

Custom print quality adjustment

Perform adjustment for all patterns (A to F).
All print modes will be adjusted.
This menu consists of the following menus.
Menu name
Custom confirmation pattern
Custom rough adjustment pattern
Custom micro Adj. PatternALL
adjustment
pattern
Individual Adj.
pattern
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.6.2.1 Custom confirmation pattern
2. Perform rough adjustment when the degree of misalignment is big.
3.6.2.2 Custom rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.6.2.3 Custom micro adjustment pattern
NOTE
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.6.2.1 Custom confirmation pattern
4. If it has not been adjusted yet, return to Step 2.
NOTE
• Perform micro adjustment if the printer is not fully adjusted after rough adjustment.
• In micro adjustment patterns, there are Adjust pattern ALL where all patterns will be adjusted
and Individual Adj. pattern where the patterns A to F can be adjusted individually.
3.6.2.3.1 Adj. Pattern ALL
3.6.2.3.2 Individual Adj. pattern
3.6 Print quality adjustment
Description
Print out the confirmation patterns (A to
F) and check the degree of misalignment.
Perform this when the degree of
misalignment is big. All confirmation
patterns (A to F) will be adjusted.
Perform this when the degree of
misalignment is small. All confirmation
patterns (A to F) will be adjusted.
Perform this when the degree of
misalignment is small. One of the
confirmation patterns (A to F) will be
adjusted.
Before using
Reference
3.6.2.1 Custom confirmation
pattern
3.6.2.2 Custom rough
adjustment pattern
3.6.2.3.1 Adj. Pattern ALL
3.6.2.3.2 Individual Adj. pattern
103