Custom Print Quality Adjustment - MUTOH ValueJet VJ-1638UH Operation Manual

3 Before using
3.7.2

Custom print quality adjustment

Perform adjustment for all patterns (A to F).
All print modes will be adjusted.
This menu consists of the following menus.
Menu name
Adj. Print2 : Confirm ptn.
Custom
Rough Ptn. ALL
Rough PatternA
to F
Fine Ptn. ALL
Fine PatternA to
F
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.7.2.1 Custom confirmation pattern
2. Perform rough adjustment when the degree of misalignment is large.
3.7.2.2 Custom rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.7.2.3 Custom fine adjustment pattern
NOTE
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
• Perform adjustment for A to F patterns if they are misaligned.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.7.2.1 Custom confirmation pattern
4. If it has not been adjusted yet, return to Step 2.
158
Description
Print out the confirmation patterns (A to
F) and check the degree of misalignment.
Perform this when the degree of
misalignment is large. All confirmation
patterns (A to F) will be adjusted.
Perform this when the degree of
misalignment is large. One of the
confirmation patterns (A to F) will be
adjusted.
Perform this when the degree of
misalignment is small. All confirmation
patterns (A to F) will be adjusted.
Perform this when the degree of
misalignment is small. One of the
confirmation patterns (A to F) will be
adjusted.
VJ-1638UH OPERATION MANUAL
Reference
3.7.2.1 Custom confirmation
pattern
3.7.2.2.1 Rough Ptn. ALL
3.7.2.2.2 Rough PatternA to F
3.7.2.3.1 Fine Ptn. ALL
3.7.2.3.2 Fine PatternA to F
3.7 Adjust print