Installation Of Software; Initial Ink Charge; Installation Of Media; Print Quality Adjustment - MUTOH ValueJet VJ-628 Startup Manual

Setting up the Printer

Installation of software

Install to the computer the software that will be used with the printer.
Initial settings for software
Have an IP address set for the printer, and have the VSM initial settings and so forth
implemented.

Initial ink charge

Install the ink cartridges and carry out charging with ink.

Installation of media

Install the media in order to carry out test printing.
Nozzle check and head cleaning
Run the check on the print head's nozzles, and if any nozzles are clogged, run head
cleaning until they are unclogged.

Print quality adjustment

Adjust the print head's reciprocating motion to obtain the required print quality.
Paper feed correction
Adjust the feed amount for the media.
Set-up is now complete!
12 Setting up the Printer