Print Quality Adjustment; Standard Print Quality Adjustment - MUTOH ValueJet VJ-1624 Operation Manual

VJ-1624/1624W OPERATION MANUAL
3.6

Print quality adjustment

It is used for optimizing the quality of image prints.
Adjustment methods for this printer are as follows.
Adjustment
method
Standard Adjusts only the print mode in the user type setting which is
currently set.
Custom Perform adjustment for all print modes.
NOTE
• This printer was adjusted at the factory shipment so that it obtains the optimum printing quality.
Adjust the quality if the print quality changes after the installation environment or the media is
changed.
• When newly setting or changing the user type setting after adjusting Standard adjust print, make
sure to adjust print.
• Since all print modes are adjusted at once after performing Custom adjust print, adjust print is not
required even after changing the print mode.
• When specifying a print mode which is different from the mode set in the user type setting, adjust
all print modes in the Custom adjust print first.
3.6.1

Standard print quality adjustment

Adjusts only the print mode in the user type setting which is currently set.
This menu consists of the following menus.
Menu name
Standard confirmation
pattern
Standard rough adjustment
pattern
Standard micro adjustment
pattern
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.6.1.1 Standard confirmation pattern
Description
Description
Print out the confirmation pattern and check the
degree of misalignment.
Perform this when the degree of misalignment is big.
Perform this when the degree of misalignment is
small.
adjustment
adjustment
pattern
pattern
pattern
3-79
3 Before using
Reference
3.6.1 Standard print quality
3.6.2 Custom print quality
Reference
3.6.1.1 Standard confirmation
3.6.1.2 Standard rough adjustment
3.6.1.3 Standard micro adjustment