Standard Print Quality Adjustment - MUTOH ValueJet VJ-1638UH Operation Manual

3 Before using
3.7.1

Standard print quality adjustment

Adjusts only the print mode in the user type setting which is currently set.
This menu consists of the following menus.
Menu name
Adj. Print1 : Confirm ptn.
Standard
Rough Pattern
Fine Pattern
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.7.1.1 Standard confirmation pattern
2. Perform rough adjustment when the degree of misalignment is large.
3.7.1.2 Standard rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.7.1.3 Standard fine adjustment pattern
NOTE
Perform rough adjustment first when the degree of misalignment is difficult to determine.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.7.1.1 Standard confirmation pattern
4. If it has not been adjusted yet, return to step 2.
NOTE
Perform micro adjustment if the printer is not fully adjusted after rough adjustment.
146
Description
Print out the confirmation pattern and
check the degree of misalignment.
Perform this when the degree of
misalignment is large.
Perform this when the degree of
misalignment is small.
VJ-1638UH OPERATION MANUAL
Reference
3.7.1.1 Standard confirmation
pattern
3.7.1.2 Standard rough
adjustment pattern
3.7.1.3 Standard fine
adjustment pattern
3.7 Adjust print