Installing Upnp Settings On Internet Explorer - FLIR Quasar Gen III CF-6308 User And Installation Manual

Appendices

10.3 Installing UPnP Settings on Internet Explorer

Open the Desktop > Network window. Follow the instructions below to enable UPnP so that the camera
can be discovered and displayed in Network locations under Other Devices:
To enable UPnP discovery in Windows 7, 8, and 8.1
1. Click (Start) and select Control Panel.
2. Click Network and Internet.
3. Click Network and Sharing Center.
4. Click Change advanced sharing settings.
5. Expand the Home or Work node, select Turn on network discovery.
6. Click Save Changes.
98
Control Panel > Network Window
Windows 7, 8, and 8.1 Advanced Sharing Settings Dialog Box
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017