Recording Settings - FLIR Quasar Gen III CF-6308 User And Installation Manual

9.3.1.6.4 Recording Settings

The Recording Settings screen is used to configure recording settings.
Note:
In order to record, at least one stream must be set to H.264.
To configure recording settings
1. From the Record Status drop-down list, select Video or Audio and Video.
2. From the Record Status drop-down list, select One Shot (default) or Continuous.
· If you select One Shot, do the following:
a. In the Clip Duration text box, enter a value from 5 to 10 seconds.
b. In the Clip Size text box, enter a value from 10 to 20 MB.
If you select Continuous, In the Clip Size text box, enter a value from 10 to 20 MB.
·
3. Click Save.
9.3.1.6.5 SD Card
The SD Card screen is used for configuring the microSD card. The card status is displayed in the Mount
Status row. The status is displayed as mounted if the microSD card is installed and not_mounted if the
card is not installed.
May 21, 2017
Events Handler > Recording Settings > One Shot Screen
Events Handler > Recording Settings > Continuous Screen
Events Handler > SD Card Screen
CF-6308 Box IP Camera User and Installation Guide
Configuration and Operation
69