FLIR Quasar Gen III CF-6308 User And Installation Manual page 28

Configuring the Unit's Initial IP Address
To manage the camera using Latitude or on a network with static IP configuration
1. Insert the CD included in the package in your computer's disk drive.
2. Run the dna.exe file by clicking the
displayed in the DNA Discovery window. See Figure:
3. Select the unit by right-clicking it. The DNA - Assign IP window is displayed.
4. Uncheck Use DHCP.
5. Enter the unit's default IP address (192.168.0.250), Subnet mask, and Gateway IP address in the
respective field.
6. Click Update. The unit reboots with the new settings.
7. Click on the unit in DNA's Discover List. The camera's Login window opens.
See Figure: Login
8. Enter the default User Name (admin) and Password (admin).
Note:
The user name and password are case-sensitive.
9. Click Login. The camera's web interface opens. See Figure:
10. Click the on-screen message to install the Ariel Player plug-in. The Ariel Player Plug-in message
is displayed. See Figure:
22
DNA Assign IP - Use DHCP Screen
Window.
Ariel Player Plug-in Download Information
CF-6308 Box IP Camera User and Installation Guide
icon. The DNA application opens and the device is
DNA Discovery
Web
Window.
Interface.
Bar.
May 21, 2017