FLIR Quasar Gen III CF-6308 User And Installation Manual page 47

To configure OSD settings
1. Select Basic Configuration > OSD. The OSD screen is displayed.
2. In the Basic Settings section, configure the following settings for OSD-1 and OSD-2:
· Enable – From the drop-down list, select one of the following:
·
·
·
Back ground Color – From the drop-down list, select Black or Transparent (default setting).
·
· Text Color – From the drop-down list, select Black or White (default setting).
Location X – Move the slider from 1 to 10 to set the location on the screen for the OSD.
·
The default setting is 1.
· Location Y – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
3. In the Event section, configure the following settings in case an event occurs:
· Back ground Color – From the drop-down list, select Black or Transparent (default setting).
Text Color – From the drop-down list, select Black or White (default setting).
·
Location X – Move the slider from 1 to 10 to set the location on the screen for the OSD.
·
The default setting is 1.
Location Y – Move the slider from 1 to 10 to set the location on the screen for the OSD.
·
The default setting is 1.
4. Click Save when finished.
May 21, 2017
Date – Enables you to enter the date to display.
Text – Enables you to enter the time to display.
OFF – Disables the OSD function. This is the default setting.
CF-6308 Box IP Camera User and Installation Guide
OSD Screen
Configuration and Operation
41