Privacy Zone - FLIR Quasar Gen III CF-6308 User And Installation Manual

4. Repeat Step 3 for Stream2 and Stream3. If you are not using additional streams, select Off from
the Resolution drop-down list.
5. Click Save.
9.3.2.2

Privacy Zone

A privacy zone enables users to cover a specific portion of the screen for privacy reasons. Users can define
up to 8 privacy zones. After setting up a privacy zone, in the live view screen a frame is displayed whose
color, size and position can be customized according to users' preference.
May 21, 2017
· Select CVBR (Constrained Variable Bit Rate) to enable greater
control over image parameters. CVBR uses less storage capacity
than CBR. This is helpful in complex scenes, which use more bits
than simple scenes. CVBR is desirable if you want an optimum bit
rate from frame-to-frame with a relatively predictable file size.
Continue with the following steps.
· Set the Max Bit Rate to a value between 64 to 20000. The default
settings are H.264 at 2925 kbps for UHD/4K @ 15 fps, 691 kbps
for HD 720p @ 15 fps, and 375 kbps for D1 @ 15 fps. The higher
the bit rate, the better the image quality. Set the maximum bit
rate high enough to allow for a high instantaneous bit for more
complex video. A higher bit rate consumes more storage space.
· Set the Encoding Priority. This function enables the user to adjust
the quality of the picture along a single axis. The slider ranges
from 1 (low bit rate) to 10 (high picture quality). The default setting
is 6.
The slider is configured based on Quantization Parameter (QP) values.
Setting QP to a high value increases the bit rate and results in high
compression, but this is at the expense of poor decoded image quality.
Setting QP to a low value results in better decoded image quality, but
with lower compression.
Privacy Zone Screen
CF-6308 Box IP Camera User and Installation Guide
Configuration and Operation
77