FLIR Quasar Gen III CF-6308 User And Installation Manual page 46

Configuration and Operation
To restore full factory defaults
1. Click Full factory defaults. The camera reboots. After the reboot finishes, a popup window opens
with the message "Rebooting complete".
Note:
1. Selecting Full factory defaults causes the camera to lose all network settings.
2. Since the unit's IP address might change when restoring full factory defaults, it is
recommended to use DNA to discover the unit after rebooting.
2. Click OK. A dialog box opens, requesting you to close the tab in your browser.
3. Close the tab.
4. Open a new tab in your browser, and re-enter the camera's IP address. The camera's Login
window opens.
5. Enter your login credentials. The camera's home page opens.
9.3.1.2.5 OSD
The OSD (On-Screen Display) screen is used for setting the background color, text color, and location for
displaying the date or text in two configurable locations on the Live View window. It is also possible to set
the background color and text color to display upon the occurrence of an event.
Set the OSD location according to the following coordinates on the X and Y axes:
40
OSD Location Coordinates
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017