FLIR Quasar Gen III CF-6308 User And Installation Manual page 60

Configuration and Operation
9.3.1.4.9 SSL
The SSL screen is used for configuring the Secure Socket Layer (SSL) or Transport Layer Security (TLS)
protocol, which protects camera settings and username/password information. SSL/TLS is used, in turn,
by the HTTPS protocol for allowing secure IP connections between the camera and a web browser over
HTTP.
Note:
SSL is enabled from the
In order to use HTTPS on the camera, an HTTPS certificate must be installed. The HTTPS certificate can
be obtained either by creating and sending a certificate request to a Certificate Authority (CA) or by
creating a self-signed HTTPS certificate as described below.
Note:
The self-signed certificate does not provide the same level of security as a CA-issued certificate.
To configure SSL settings
1. From the Method drop-down list, select one of the following: Self-Signed, Request, or Upload
Certificate. The default is NONE.
To obtain a self-signed certificate
1. From the Method drop-down list, select Self-Signed. The Self-Signed screen is displayed.
54
Network > General screen.
CF-6308 Box IP Camera User and Installation Guide
Network > SSL Screen
SSL Self-Signed Screen
May 21, 2017