FLIR Quasar Gen III CF-6308 User And Installation Manual page 59

4. If you are using FreeDNS, the Hash text box also is displayed. Enter the Hash value, which is a
hash of your user name and password. It is available from http://freedns.afraid.org.
5. Click Save.
9.3.1.4.8 LDAP
The LDAP screen is used for configuring use of the Lightweight Directory Access Protocol, an industry-
standard protocol for accessing and maintaining distributed directory information services over an IP
network.
To configure LDAP basic settings
1. In the Server text box, enter the LDAP server address.
2. In the Port text box, enter the network port number of the LDAP server. The range is 1025 to
65535. The default is 389.
3. In the Base DN text box, enter or edit the default Distinguished Name (Domain Components) of the
parent entry. This is used for searching the directory tree in the LDAP server. The default setting is
dc=ipcamera,dc=com.
4. In the Bind DN Template text box, enter or edit the attributes used for authenticating the camera
on the LDAP server. The default setting is uid=%u,dc=users,dc=ipcamera,dc=com.
5. In the Search Template text box, enter or edit the attribute used for the Common Name. The
default is cn=%u.
To configure group mappings
1. In the Admins text box, enter or edit the attributes used for searching for an Administrator.
2. In the Operators text box, enter or edit the attributes used for searching for an Operator.
3. In the Users text box, enter or edit the attributes used for searching for a User.
To configure authentication settings
1. Enter the User Name and Password in the respective text boxes to access the LDAP server.
2. Click Save.
May 21, 2017
Network > LDAP Screen
CF-6308 Box IP Camera User and Installation Guide
Configuration and Operation
53