Configuration And Operation; Cf-6308 Web Interface - FLIR Quasar Gen III CF-6308 User And Installation Manual

9 Configuration and Operation

The Quasar Gen III camera is provided with a browser-based configuration interface for video playback and
recording. In this chapter, information about main page introduction, system related settings and camera
settings are described in detail.
Additionally, if FLIR's Latitude VMS is used, many of the configurations and features of FLIR's VMS provide
configuration and automation of the camera.
This section includes the following information:
Accessing the CF-6308 via a Web Browser
·
Live View
·
· System Tab
Streaming Tab
·
Camera Tab
·
Logout
·
9.1

CF-6308 Web Interface

The camera's web interface can be configured and operated from a 32-bit version of Internet Explorer 10 and
above, Microsoft Edge 38 and above, Chrome v.55 and above, or Firefox v.50 and above.
To access the unit via the web browser
1. Open your browser.
2. Enter the unit's IP address in the browser's address bar.
3. Press the ENTER key on your PC keyboard. The unit's Login window is displayed.
See Figure: Login
4. Enter the user name (default: admin) and password (default: admin) to log into the system. The
unit's web interface opens. See Figure:
Note:
The user name and password are case-sensitive.
5. If you are using the system for the first time or you have uploaded a new firmware version, click the
message displayed on the screen to download to allow the MediaPlayer Control
Module.exe plug-in.
6. Click Allow. The Windows Installer opens and the Ariel Player Wizard dialog box is displayed.
Follow instructions in the
May 21, 2017
Window.
Web
Configuring the Unit's Initial IP Address
CF-6308 Box IP Camera User and Installation Guide
Interface.
section.
Configuration and Operation
29