FLIR Quasar Gen III CF-6308 User And Installation Manual page 66

Configuration and Operation
Note:
Recording must be enabled from the
record audio.
To enable audio
1. Select the Audio checkbox.
2. Click Save.
To set the audio level
1. Move the Sound Intensity Threshold slider to the desired level between 1-100. The lower the
setting, more sounds that are detected.
2. Click Save.
To define the method to store a snapshot
1. See instructions in the
To record an event
1. See instructions in the
To send email notifications
1. See instructions in the
To activate the on-screen display
1. See instructions in the
To set the arming schedule
1. See instructions in the
9.3.1.5.3 Motion
The Events Source > Motion screen is used for:
Enabling and defining the motion zone area settings
·
· Sending an alarm upon a motion event
Selecting and playing an audio file upon a motion event
·
Defining the method for storing a snapshot in the camera's microSD card
·
Sending a snapshot of the event to an FTP server
·
· Recording an event in the camera's microSD card
· Sending email notifications
Displaying text on-screen upon a motion event
·
Setting the arming schedule
·
60
System > Events Handler > Recording Settings
Alarm section.
Alarm section.
Alarm section.
Alarm section.
Alarm section.
CF-6308 Box IP Camera User and Installation Guide
screen in order to
May 21, 2017