Internet Security Settings On Internet Explorer - FLIR Quasar Gen III CF-6308 User And Installation Manual

Appendices

10.2 Internet Security Settings on Internet Explorer

If the existing ActiveX certificate is old or invalid, the ActiveX installation may fail in systems that are not
connected to the Internet, which therefore cannot update their security certificates. In this case, the
Setup.exe file in the ActiveX folder on the supplied CD should be run. You can then continue with the
installation.
If ActiveX control installation is blocked, either set Internet security level to default or change ActiveX
controls and plug-in settings.
To set the default Internet security level
1. Start Internet Explorer (IE).
2. From the Command Bar toolbar, select Tools and select Internet Options from the menu that
appears.
3. In the Internet Options window that appears, select the Security tab.
4. Select
5. If the settings are not defined as default, select Default Level and move the Allowed levels for this
zone slider to Medium-high and select OK.
6. Close all browsers and reopen so that the settings take effect.
96
Command Bar Toolbar – Select Internet Options
in Select a zone to view or change security settings.
Internet Options > Security Tab
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017