White Balance - FLIR Quasar Gen III CF-6308 User And Installation Manual

Configuration and Operation
· Hue – Set the image hue between -100 to 100, which provides the deepest
hue. The default is 0.
To configure mirror flip settings
1. In the Mirror Flip Setting section, from the Orientation drop-down list, select one of the following:
Flip – This setting flips the image upside-down.
·
Mirror – This setting views the image from a different angle.
·
· Both – This setting views the image upside-down from a different angle.
OFF (default)
·
9.3.3.3

White Balance

The White Balance screen is used to create the best color rendition.
To set the White Balance mode
1. From the Mode drop-down list, select one of the following options:
ATW – In ATW mode, color is continuously adjusted according to the color
·
temperature of the scene illumination. This is the default setting.
Auto – In Automatic mode, the color in a scene is automatically adjusted
·
according to the ambient lighting between 2500°K to 10000°K.
Manual – In Manual mode, white balance is adjusted on-screen according to
·
the type of lighting.
a. To set the gain values, adjust the following settings:
b. To quickly balance the color, click One Push.
88
White Balance ATW Mode Screen
White Balance Auto Mode Screen
White Balance Manual Mode Settings
R Gain: Adjusts the red color in the image from 0 to 511. The higher
o
the number, the redder the image. The default setting is 64.
B Gain: Adjusts the blue color in the image from 0 to 511. The higher
o
the number, the bluer the image. The default setting is 64.
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017