Network Settings - FLIR Quasar Gen III CF-6308 User And Installation Manual

10.6 Network Settings

Following are the network protocols and ports used by the camera:
Protocol
FTP
HTTP
HTTPS
Multicast Streaming
Multicast UDP
NTP
RTSP
RTP
SNMP
SNMP Trap port
May 21, 2017
Port Usage
21 Uploading files to the FTP server
80 Sending commands, requests, replies and notifications
Using the secure socket protocols SSL/TLS over HTTP. HTTPS
443
must be enabled if your network uses SNMPv3.
As
Video/streaming (multicast). Uses the ONVIF address defined by
defined in
the Video Management System
the units
9766 Unit self-publishing. Uses IP address 224.9.9.9
123 Time synchronization with a network time server using SNTP
554 RTP session setup
2000 to
Multimedia streaming
65535
161 IP management system
Sending alarm event and exception messages to the surveillance
162
center
CF-6308 Box IP Camera User and Installation Guide
Appendices
107