FLIR Quasar Gen III CF-6308 User And Installation Manual page 76

Configuration and Operation
To configure the microSD card
1. From the Overwrite drop-down list, select ON. The default is OFF.
2. Click Save.
9.3.1.6.6 Snapshot
The Snapshot screen is used for configuring snapshot settings.
To configure snapshot settings
1. In the Pre-Event Capture Count text box, enter the number of frames (1 to 10) to capture before
taking a snapshot of an event. The default is 3 frames.
2. In the Event Capture Interval text box, enter the time interval (1 to 10 seconds) to capture between
snapshots. The default is 1 frame.
3. In the Post-Event Capture Count text box, enter the number of frames (more than one) to capture
after taking a snapshot. The default is 3 frames.
4. Click Save.
9.3.1.6.7 Sound
The sound screen enables you to upload up to 10 small PCM audio files. These sound files can be
triggered upon any event that is set in the Events Source section. For example, you can trigger one
warning recording that alerts an intruder that he has been detected and then a stronger warning to not to
proceed if he has not left the scene. The file will be played when the audio is enabled on the Sound screen
and the triggering event occurs.
70
Events Handler > Snapshot Screen
Sound Screen
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017