FLIR Quasar Gen III CF-6308 User And Installation Manual page 57

To enable EAP-TTLS
1. Select EAP-TTLS. The Basic Settings screen opens.
2. From the Inner Authentication drop-down list, select one of the following protocols: CHAP,
EAP-MSCHAPV2, MD5, MSCHAP, MSCHAPV2, or PAP.
3. Enter the User Name and Password in the respective text box.
4. Enter the Anonymous ID in the Anonymous ID text box.
5. Click Browse to download the CA Certificate. The Status is displayed as "Not Installed" until the
CA certificate is downloaded.
6. Do one of the following:
· Click Save. The status is displayed as "Not Installed" until the configuration is saved.
· Click Test and Save to test and save the configuration.
To enable EAP-PEAP
1. Select EAP-PEAP. The Basic Settings screen opens. By default the Inner Authentication protocol
is MSCHAPV2.
2. Enter the User Name and Password in the respective text box.
3. Click Browse to download the CA Certificate.
4. Do one of the following:
· Click Save. The status is displayed as "Not Installed" until the configuration is
saved.
· Click Test and Save to test and save the configuration.
May 21, 2017
EAP-TTLS Screen
EAP-PEAP Screen
CF-6308 Box IP Camera User and Installation Guide
Configuration and Operation
51