Picture Adjustment - FLIR Quasar Gen III CF-6308 User And Installation Manual

In the IR Control section, configure the following settings:
Mode – See the explanation in the
·
· LED Brightness – See the explanation in the
In the Lens Type section, select the lens type: Manual Iris, DC Iris, or P Iris. The selection is displayed in
the text box next to the selected lens type.
Click Reset if you want to return to factory default settings.
9.3.3.2

Picture Adjustment

The Picture Adjustment screen enables you to configure picture quality, color and mirror flip settings.
Settings are saved automatically after configuration. To restore settings to factory default, click Reset.
To configure quality settings
1. In the Quality section, configure the following settings:
· Sharpness – Set the slider between 0-100, which provides the highest
sharpness around the edges and for small features. The default setting is 40.
· 3D Noise Reduction – Set the slider between 0-100. The default setting is 20.
Gamma Correction – From the drop-down list, select 0.45 or 1. The default
·
setting is 0.45. Gamma correction is used to ensure faithful reproduction of an
image. When gamma = 1, the original image is the same as the image
displayed on your screen. If the gamma is set at 0.45, there will be less
contrast.
To configure color settings
1. In the Color section, configure the following settings:
Brightness – Set the image brightness between -100 to 100, which provides
·
the highest brightness. The default is 0.
Contrast – Set the image contrast between -100 to 100, which provides the
·
highest contrast. The default is 0.
Saturation – Set the image saturation -100 to 100. The lower the number, the
·
closer the image is to a grayscale (i.e., monochrome or black-and-white)
image. The higher the number, the deeper the color image (i.e., reds will be
redder and blues will be bluer). The default is 0.
May 21, 2017
Auto Shutter
Auto Shutter
Picture Adjustment Screen
CF-6308 Box IP Camera User and Installation Guide
section above.
section above.
Configuration and Operation
87