FLIR Quasar Gen III CF-6308 User And Installation Manual page 70

Configuration and Operation
To define the method to store a snapshot
1. See instructions in the
To record an event
1. See instructions in the
To send email notifications
1. See instructions in the
To set the arming schedule
1. See instructions in the
9.3.1.5.6 Tampering
The Events Source > Tampering screen enables you to:
Enable and define tampering settings
·
Send an alarm upon a tampering event
·
Select and play an audio file upon a tampering event
·
· Define the method for storing a snapshot in the camera's microSD card
Send a snapshot of the event to an FTP server
·
Record an event in the camera's microSD card
·
Send email notifications
·
· Display text on-screen if there is a tampering event
· Set the alarm schedule
To enable tamper detection
1. Select Enable. By default, Enable is not checked.
2. From the Sensitivity drop-down list, select High, Medium, or Low.
64
Alarm section.
Alarm section.
Alarm section.
Alarm section.
Events Source > Tampering Screen
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017