FLIR Quasar Gen III CF-6308 User And Installation Manual page 69

9.3.1.5.5 Schedule
The Events Source > Schedule screen is used for:
Setting a trigger interval for notifications
·
· Sending an alarm
Selecting and playing an audio file upon the occurrence of an event
·
Defining the method for storing a snapshot in the camera's microSD card
·
Sending a snapshot of the event to an FTP server
·
· Recording an event in the camera's microSD card
· Sending email notifications
Setting the alarm schedule
·
To set a trigger interval
1. Select Enable. By default, Enable is not checked.
2. Move the Trigger Interval slider from 1 to 3600 seconds. The default setting is 10 seconds.
To enable the Alarm Out function
1. See instructions in the
To enable the Audio Out function
1. In the Handlers section, select the Audio Out checkbox. By default, it is not checked.
2. From the Audio Sound drop-down list, select the number for the audio file that you want to play.
See the Event Handler > Sound
of an event.
3. Click Save.
May 21, 2017
Events Source > Schedule Screen
Alarm section.
section to load the audio files that are triggered upon occurrence
CF-6308 Box IP Camera User and Installation Guide
Configuration and Operation
63