FLIR Quasar Gen III CF-6308 User And Installation Manual page 84

Configuration and Operation
To set a privacy zone
1. Select a privacy zone number from the list of Zone-1 through Zone-8.
2. From the Privacy Color Setting drop-down list, select Black , Grey, or White. The default setting is
Black .
3. In the Enable section, select ON. The default setting is OFF.
4. Use your mouse to draw a region of interest on the screen.
5. Click Save. The privacy zone is displayed on the screen. Repeat the above steps for each privacy
zone.
To delete a privacy zone
1. Select the privacy zone.
2. Click Clear. The privacy zone is deleted.
3. Repeat the above steps for each privacy zone.
9.3.2.3 ROI
The ROI (Region of Interest) screen is used for configuring regions of interest on the Live View window.
The image displayed within the ROI box can be displayed with higher quality than the image outside of the
box. Overall bit rate is not affected by selecting regions of interest. Enhancing the video where the quality is
very important consumes more bandwidth, but enables lowering image quality and bandwidth consumption
on less important zones in the scene.
To set a region of interest
1. From the ROI list, select ROI-1 or ROI-2.
2. In the Enable section, select ON. The default setting is OFF.
3. Use your mouse to draw a region of interest on the screen.
4. From the Level drop-down list, select a number between 1-6, where 1 is the lowest quality and 6 is
the highest quality for the image within the region of interest.
5. Click Save. The region of interest is displayed on the screen.
6. To delete the region of interest, select ROI-1 or ROI-2 and click Clear. The ROI is deleted.
78
ROI Screen
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017