FLIR Quasar Gen III CF-6308 User And Installation Manual page 100

Appendices
Camera
Analytics
Motion Detection
Defocus
Tampering Alarm
Network
Interface
Services and Protocols
Video Streaming
Event Notification
Event Storage
Password Levels
Security
Firmware Upgrade
Operating Systems
Internet Browser
94
When the unit detects motion, a corresponding action is triggered.
On/Off, by zone, object size, sensitivity level, and schedule.
Notifications and On-Event Recording. Includes configurable alarms and
broad range of recording on detection of video and snapshots.
When the unit detects tampering, a corresponding action is triggered.
On/Off, on-event notification, sensitivity level, schedule, recording to SD
card, and more are supported as events in Latitude.
1 x 10/100 Mbps Ethernet RJ45 interface (IEEE 802.3/802.3u)
IPv4, IPv6 (including IPv6 addressing, IPv6 router advertisement, IPv6
DHCP, and IPv6 web support), TCP, UDP, IGMP, ICMP, DHCP, DNS,
DDNS, RTP, RTSP, RTCP, NTP, SNTP, SMTP, HTTP, HTTPS, FTP,
PPPoE, QoS, SNMPv1/v2c/v3 (MIB-II), UPnP, ONVIF Profile S and
Profile G, LDAP
RTSP/RTP
HTTP event query, HTTP event client pulling
Recordings and snapshots
User and Administrator
802.1X (EAP-MD5, EAP-TTLS, EAP-PEAP), IP address filtering, SSL,
SNMPv3 (AES, DES, MD5, and SHA)
Flash memory for upgrading camera firmware via HTTP
Windows Server 2003, Windows Server 2008 (32-bit version); Windows
7, 8, 8.1, and 10 (all 64-bit versions)
Microsoft Internet Explorer 10 (32-bit version) and above; Microsoft Edge
38 and above; Chrome v.55 and above; Firefox v.50 and above
CF-6308 Box IP Camera User and Installation Guide
May 21, 2017