Configuration Procedure; Displaying And Maintaining Gvrp - HP 6600 Configuration Manual

On a GARP-enabled network, each port maintains its own Hold, Join, and Leave timers, but only
•
one LeaveAll timer is maintained on each router. This LeaveAll timer applies to all ports on the
router.
• The value ranges for the Hold, Join, Leave, and LeaveAll timers are dependent on one another.
See Table 18
Set the LeaveAll timer greater than any Leave timer and not smaller than its default value, 1000
•
centiseconds. Each time a LeaveAll timer expires, a network-wide re-join occurs.
A router sends LeaveAll messages at the interval set by its LeaveAll timer or the LeaveAll timer on
•
another router on the network, whichever is smaller. This is because each time a router on the
network receives a LeaveAll message it resets its LeaveAll timer.
• To keep the dynamic VLANs learned through GVRP stable, do not set the LeaveAll timer smaller
than its default value, 1000 centiseconds.

Configuration procedure

To configure the GARP timers:
Step
1. Enter system view.
2. Configure the GARP
LeaveAll timer.
3. Enter Ethernet interface
view.
4. Configure the Hold
timer.
5. Configure the Join timer.
6. Configure the Leave
timer.

Displaying and maintaining GVRP

Task
Display statistics about GARP
on ports.
for their dependencies.
Command
system-view
garp timer leaveall timer-value
•
Enter Ethernet interface view
or Layer 2 aggregate interface
view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
garp timer hold timer-value
garp timer join timer-value
garp timer leave timer-value
Command
display garp statistics [ interface interface-list ] [ |
{ begin | exclude | include } regular-expression ]
Remarks
N/A
Optional.
The default setting is 1000 centiseconds.
The LeaveAll timer applies to all ports.
Use one of the commands.
Optional.
The default setting is 10 centiseconds.
Optional.
The default setting is 20 centiseconds.
Optional.
The default setting is 60 centiseconds.
136
Remarks
Available in any view.