Step
8.
Create a QoS policy and enter
QoS policy view.
9.
Associate the class with the
behavior in the QoS policy.
10.
Return to system view.
11.
Enter the view of interfaces
connecting to service providers.
12.
Apply the QoS policy to the
outgoing packets of the
interface.
Configuring the TPID value in VLAN tags
Configurations made in different views have different effect. You can configure the TPID value in VLAN
tags in one of the following views:
•
System view—The configuration takes effect on all ports of the device.
Interface view or port group view—The configuration takes effect on a port or all ports in a port
•
group.
In system view
To configure TPID values globally:
Step
1.
Enter system view.
2.
Set the global TPID value in
CVLAN tags.
In interface or port group view
To configure TPID values on a port or all ports in a port group:
Step
1.
Enter system
view.
Command
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
•
Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
qos apply policy policy-name outbound
Command
system-view
qinq ethernet-type customer-tag
hex-value
Command
system-view
150
Remarks
N/A
N/A
N/A
Use one of the commands.
N/A
Remarks
N/A
Optional.
The default setting is 0x8100.
Remarks
N/A