HP 6600 Configuration Manual page 87

[RouterA-mst-region] instance 1 vlan 10
[RouterA-mst-region] instance 3 vlan 30
[RouterA-mst-region] instance 4 vlan 40
[RouterA-mst-region] revision-level 0
# Activate MST region configuration.
[RouterA-mst-region] active region-configuration
[RouterA-mst-region] quit
# Specify the current device as the root bridge of MSTI 1.
[RouterA] stp instance 1 root primary
# Enable the spanning tree feature globally.
[RouterA] stp enable
3. Configure Router B:
# Enter MST region view, and configure the MST region name as example. Map VLAN 10, VLAN
30, and VLAN 40 to MSTI 1, MSTI 3, and MSTI 4, respectively. Configure the revision level of the
MST region as 0.
<RouterB> system-view
[RouterB] stp region-configuration
[RouterB-mst-region] region-name example
[RouterB-mst-region] instance 1 vlan 10
[RouterB-mst-region] instance 3 vlan 30
[RouterB-mst-region] instance 4 vlan 40
[RouterB-mst-region] revision-level 0
# Activate MST region configuration.
[RouterB-mst-region] active region-configuration
[RouterB-mst-region] quit
# Specify the current device as the root bridge of MSTI 3.
[RouterB] stp instance 3 root primary
# Enable the spanning tree feature globally.
[RouterB] stp enable
4. Configure Router C:
# Enter MST region view, and configure the MST region name as example. Map VLAN 10, VLAN
30, and VLAN 40 to MSTI 1, MSTI 3, and MSTI 4, respectively. Configure the revision level of the
MST region as 0.
<RouterC> system-view
[RouterC] stp region-configuration
[RouterC-mst-region] region-name example
[RouterC-mst-region] instance 1 vlan 10
[RouterC-mst-region] instance 3 vlan 30
[RouterC-mst-region] instance 4 vlan 40
[RouterC-mst-region] revision-level 0
# Activate MST region configuration.
[RouterC-mst-region] active region-configuration
[RouterC-mst-region] quit
# Specify the current device as the root bridge of MSTI 4.
[RouterC] stp instance 4 root primary
# Enable the spanning tree feature globally.
78