Configuring Mac-Based Vlans; Introduction To Mac-Based Vlan - HP 6600 Configuration Manual

Verifying the configuration
1. Host A and Host C can ping each other successfully, but they both fail to ping Host B. Host B and
Host D can ping each other successfully, but they both fail to ping Host A.
2. Determine whether the configuration is successful by displaying relevant VLAN information.
# Display information about VLANs 100 and 200 on Router A.
[RouterA-GigabitEthernet4/0/3] display vlan 100
VLAN ID: 100
VLAN Type: static
Route Interface: not configured
Description: VLAN 0100
Name: VLAN 0100
Tagged
GigabitEthernet4/0/3
Untagged Ports:
GigabitEthernet4/0/1
[RouterA-GigabitEthernet4/0/3] display vlan 200
VLAN ID: 200
VLAN Type: static
Route Interface: not configured
Description: VLAN 0200
Name: VLAN 0200
Tagged
GigabitEthernet4/0/3
Untagged Ports:
GigabitEthernet4/0/2

Configuring MAC-based VLANs

Introduction to MAC-based VLAN

The MAC-based VLAN feature assigns hosts to a VLAN based on their MAC addresses. This feature is
usually used in conjunction with security technologies such as 802.1X to provide secure, flexible network
access for terminal devices.
Static MAC-based VLAN assignment
Static MAC-based VLAN assignment applies to networks containing a small number of VLAN users. In
such a network, you can create a MAC address-to-VLAN map containing multiple MAC
address-to-VLAN entries on a port, enable the MAC-based VLAN feature on the port, and assign the port
to MAC-based VLANs.
With static MAC-based VLAN assignment configured on a port, the device processes received frames by
using the following guidelines:
When the port receives an untagged frame, the device looks up the MAC address-to-VLAN map
•
based on the source MAC address of the frame for a match.
The device first performs a fuzzy match. In the fuzzy match, the device searches the MAC
address-to-VLAN entries whose masks are not all-Fs and performs a logical AND operation on
Ports:
Ports:
99