HP 6600 Configuration Manual page 113

Figure 36 Network diagram
Configuration considerations
• Create VLANs 100 and 200.
Configure the uplink ports of Router A and Router C as trunk ports, and assign them to VLANs 100
•
and 200.
• Configure the downlink ports of Router B as trunk ports, and assign them to VLANs 100 and 200.
Assign the uplink ports of Router B to VLANs 100 and 200.
Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of Laptop
•
2 with VLAN 200.
Configuration procedure
1. Configure Router A:
# Create VLANs 100 and 200.
<RouterA> system-view
[RouterA] vlan 100
[RouterA-vlan100] quit
[RouterA] vlan 200
[RouterA-vlan200] quit
# Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of
Laptop 2 with VLAN 200.
[RouterA] mac-vlan mac-address 000d-88f8-4e71 vlan 100
[RouterA] mac-vlan mac-address 0014-222c-aa69 vlan 200
# Configure GigabitEthernet 4/0/1 as a hybrid port that sends packets of VLANs 100 and 200
untagged, and enable the MAC-based VLAN feature on it, so that Laptop 1 and Laptop 2 can
access the network through GigabitEthernet 4/0/1.
[RouterA] interface GigabitEthernet 4/0/1
[RouterA-GigabitEthernet4/0/1] port link-type hybrid
[RouterA-GigabitEthernet4/0/1] port hybrid vlan 100 200 untagged
104