Configuring The Management Address And Its Encoding Format - HP 6600 Configuration Manual

Step
4. Configure the advertisable
TLVs in Layer 3 Ethernet
interface view.

Configuring the management address and its encoding format

LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encodes its
management address in character string format, you must configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
To configure a management address to be advertised and its encoding format on a port or group of
ports:
Step
1. Enter system view.
2. Enter Ethernet interface view
or port group view.
3. Allow LLDP to advertise the
management address in
LLDPDUs and configure the
advertised management
address.
Command
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot3-tlv { all | link-aggregation | mac-physic
| max-frame-size | power } | med-tlv { all |
capability | inventory | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1-10> | elin-address
tel-number } | power-over-ethernet } }
Command
system-view
•
Enter Layer 2/Layer 3 Ethernet
interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
lldp management-address-tlv
[ ip-address ]
214
Remarks
Optional.
By default, all types of
LLDP TLVs, except the IEEE
802.1 organizationally
specific TLVs, network
policy TLVs, and location
identification TLVs, are
advertisable on a Layer 3
Ethernet port.
Remarks
N/A
Use either command.
Optional.
By default, the management
address is sent through LLDPDUs.
•
For a Layer 2 Ethernet port, the
management address is the
main IP address of the lowest-ID
VLAN carried on the port. If
none of the carried VLANs is
assigned an IP address, no
management address will be
advertised.
•
For a Layer 3 Ethernet port, the
management address is its own
IP address. If no IP address is
configured for the Layer 3
Ethernet port, no management
address will be advertised.