Displaying And Maintaining Lldp; Basic Lldp Configuration Example - HP 6600 Configuration Manual

Step
3. Enable LLDP trapping.
4. Return to system view.
5. Set the LLDP trap transmit
interval.

Displaying and maintaining LLDP

Task
Display global LLDP information or
information contained in LLDP TLVs
to be sent through a port.
Display information contained in
LLDP TLVs sent from neighboring
devices.
Display LLDP statistics.
Display LLDP status of a port.
Display types of advertisable
optional LLDP TLVs.

Basic LLDP configuration example

Network requirements
As shown in
and Router B are connected to GigabitEthernet 4/0/1 and GigabitEthernet 4/0/2 of Router A.
Enable LLDP globally on Router A and Router B to monitor the link between Router A and Router B and
the link between Router A and the MED device on the NMS.
Command
lldp notification remote-change enable
quit
lldp timer notification-interval interval
Figure 76, the NMS and Router A are located in the same Ethernet network. An MED device
Command
display lldp local-information [ global |
interface interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
display lldp neighbor-information [ brief |
interface interface-type interface-number
[ brief ] | list [ system-name system-name ] ]
[ | { begin | exclude | include }
regular-expression ]
display lldp statistics [ global | interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
display lldp status [ interface interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display lldp tlv-config [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
218
Remarks
By default, LLDP trapping is
disabled.
N/A
Optional.
The default setting is 5
seconds.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.