Manual Voice Vlan Assignment Mode Configuration Example - HP 6600 Configuration Manual

[RouterA-GigabitEthernet4/0/1] voice vlan mode auto
# Configure VLAN 2 as the voice VLAN for GigabitEthernet 4/0/1.
[RouterA-GigabitEthernet4/0/1] voice vlan 2 enable
[RouterA-GigabitEthernet4/0/1] quit
# Configure GigabitEthernet 4/0/2.
[RouterA] interface GigabitEthernet 4/0/2
[RouterA-GigabitEthernet4/0/2] port link-type hybrid
[RouterA-GigabitEthernet4/0/2] voice vlan mode auto
[RouterA-GigabitEthernet4/0/2] voice vlan 3 enable
Verifying the configuration
# Display OUI addresses, OUI address masks, and description strings.
<RouterA> display voice vlan oui
Oui Address
0001-e300-0000
0003-6b00-0000
0004-0d00-0000
0011-1100-0000
0011-2200-0000
0060-b900-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
# Display the states of voice VLANs.
<RouterA> display voice vlan state
Maximum of Voice VLANs: 128
Current Voice VLANs: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 30 minutes
Voice VLAN enabled port and its mode:
PORT
---------------------------------------------------------------------------
GigabitEthernet4/0/1
GigabitEthernet4/0/2

Manual voice VLAN assignment mode configuration example

Network requirements
As shown in
Create VLAN 2 and configure it as a voice VLAN that permits only voice traffic to pass through.
Configure GigabitEthernet 4/0/1 as a hybrid port, and configure GigabitEthernet 4/0/1 to operate in
manual voice VLAN assignment mode. Configure GigabitEthernet 4/0/1 to allow voice traffic with an
OUI address of 001 1-2200-0000, a mask of ffff-ff00-0000, and a description string of test to be
forwarded in the voice VLAN.
Mask
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
Figure 43, the IP phones send untagged voice traffic.
Description
Siemens phone
Cisco phone
Avaya phone
IP phone A
IP phone B
Philips/NEC phone
Pingtel phone
Polycom phone
3com phone
VLAN MODE
2 AUTO
3 AUTO
127
COS DSCP
6 46
6 46