®
xStack
Download Firmware From RCP
This page allows the user to download firmware from a RCP Server to the Switch and updates the switch.
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Download to initiate the download.
Upload Firmware
The following window is used to upload firmware from the Switch.
To view the following window, click Tools > Upload Firmware, as shown below:
Upload Firmware To TFTP
This page allows the user to upload firmware from the Switch to a TFTP Server.
The fields that can be configured are described below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 13-8 Download Firmware From RCP window
Description
Here the user can enter the RCP Server IP Address used.
Here the user can enter the appropriate Username used.
Here the user can enter the location and name of the Source File.
Here the user can enter the location and name of the Destination File.
Figure 13-9 Upload Firmware To TFTP window
424