Table of Contents
Advertisement
®
xStack
Users can combine a number of VLAN ports together to create VLAN trunks.
To view the following window, click L2 Features > VLAN > VLAN Trunk Settings, as shown below:
The fields that can be configured are described below:
Parameter
VLAN Trunk State
Ports
Click the Apply button to accept the changes made for each individual section.
Click the Clear All button to clear all the selections made.
Click the Select All button to select all the available options in the section.
Browse VLAN
Users can display the VLAN status for each of the Switch's ports viewed by VLAN.
To view the following window, click L2 Features > VLAN > Browse VLAN, as shown below:
The fields that can be configured are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-22 VLAN Trunk Settings window
Description
Enable or disable the VLAN trunking global state.
The ports to be configured.
Figure 5-23 Browse VLAN window
Description
Enter a VLAN ID.
90
Advertisement
Table of Contents
