Table of Contents
Advertisement
®
xStack
The fields that can be configured are described below:
Parameter
Access ID (1-100)
Class
Flow Label
Action
Flow Label
Time Range Name
Ports
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Show Details button in the CPU Access Rule List, the following page will appear:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 8-37 Add CPU Access Rule window (IPv6 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to 100.
Enter the IPv6 class mask value used here.
Enter the IPv6 flow label mask value used here.
Select Permit to specify that the packets that match the access profile are forwarded by
the Switch, according to any additional rule added (see below).
Select Deny to specify that the packets that match the access profile are not forwarded by
the Switch and will be filtered.
Configuring this field, in hex form, will instruct the Switch to examine the flow label field of
the IPv6 header. This flow label field is used by a source to label sequences of packets
such as non-default quality of service or real time service packets.
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the Time Range Settings window. This will set specific times
when this access rule will be implemented on the Switch.
Enter the list of ports, used for this configuration, here.
267
Advertisement
Table of Contents
