Table of Contents
Advertisement
®
xStack
The fields that can be configured are described below:
Parameter
From Port / To Port
Notification
Admin Status
Subtype
Action
Address
Click the Apply button to accept the changes made.
NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-109 LLDP Port Settings window
Description
Here the user can select the ports used for this configuration.
Use the pull-down menu to enable or disable the status of the LLDP notification. This
function controls the SNMP trap however it cannot implement traps on SNMP when the
notification is disabled.
This function controls the local LLDP agent and allows it to send and receive LLDP
frames on the ports. This option contains TX, RX, TX And RX or Disabled.
TX: the local LLDP agent can only transmit LLDP frames.
RX: the local LLDP agent can only receive LLDP frames.
TX And RX: the local LLDP agent can both transmit and receive LLDP frames.
Disabled: the local LLDP agent can neither transmit nor receive LLDP frames.
The default value is TX And RX.
Here the user can select the type of the IP address information will be sent.
Here the user can enable or disable the action field.
Here the user can enter the IP address will that be sent.
153
Advertisement
Table of Contents
