Table of Contents
Advertisement
®
xStack
Upload Configuration
The following window is used to upload the configuration file from the Switch.
To view the following window, click Tools > Upload Configuration, as shown below:
Upload Configuration To TFTP
This page allows the user to upload the configuration file from the Switch to a TFTP Server.
The fields that can be configured are described below:
Parameter
TFTP Server IP
Destination File
Source File
Filter
Click Upload to initiate the upload.
Upload Configuration To FTP
This page allows the user to upload the configuration file from the Switch to a FTP Server.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 13-16 Upload Configuration To TFTP window
Description
Here the user can enter the TFTP Server IP Address used. The user can select IPv4 to
input an IPv4 address or select IPv6 to input an IPv6 address in the space provided.
Here the user can enter the location and name of the Destination File.
Here the user can enter the location and name of the Source File.
Here the user can specify to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
429
Advertisement
Table of Contents
