®
xStack
The fields that can be configured are described below:
Parameter
Profile ID
From CoS / To CoS
Scheduling Mechanism
Click the Apply button to accept the changes made.
Scheduling Group Settings
On this page the user can configure the scheduling group parameters.
To view the following window, click QoS > Scheduling Settings > Scheduling Group Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 7-11 Scheduling Profile Settings window
Description
Here the user can select the profile ID to configure.
Here the user can select the range on CoS to configure.
Here the user can select one of two Scheduling Mechanisms:
Strict – The queue will operate in strict mode. The highest class of service is the first to
process traffic. That is, the highest class of service will finish before other queues empty.
Weight – Specifies the weights for weighted round robin. A value between 1 and n can be
specified. The queue will operate in WRR mode if port mode is WRR. It will operate in
strict mode if port mode is strict.
Determination of n is project dependent.
235