Table of Contents
Advertisement
®
xStack
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC / PHY
Configuration Status
Link Aggregation
Maximum Frame Size
Click the Apply button to accept the changes made.
LLDP Statistics System
The LLDP Statistics System page allows you an overview of the neighbor detection activity, LLDP Statistics and the
settings for individual ports on the Switch. Select a Port number and click the Find button to view statistics for a
certain port.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Statistics System, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-113 LLDP Dot3 TLVs Settings window
Description
Here the user can enter the port range to use for this configuration.
This TLV optional data type indicates that the LLDP agent should transmit the MAC/PHY
configuration/status TLV. This indicates it is possible for two ends of an IEEE 802.3 link to
be configured with different duplex and/or speed settings and still establish some limited
network connectivity. More precisely, the information includes whether the port supports
the auto-negotiation function, whether the function is enabled, whether it has auto-
negotiated advertised capability, and what is the operational MAU type. The default state
is Disabled.
The Link Aggregation option indicates that LLDP agents should transmit 'Link Aggregation
TLV'. This indicates the current link aggregation status of IEEE 802.3 MACs. More
precisely, the information should include whether the port is capable of doing link
aggregation, whether the port is aggregated in an aggregated link, and what is the
aggregated port ID. The default state is Disabled.
The Maximum Frame Size indicates that LLDP agent should transmit 'Maximum-frame-
size TLV. The default state is Disabled.
157
Advertisement
Table of Contents
