Table of Contents
Advertisement
®
xStack
Click the Show All Rules button to navigate back to the Access Rule List.
Adding an IPv6 Egress ACL Profile
The window shown below is the Add Egress ACL Profile window for IPv6. To use specific filtering masks in this egress
ACL profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add Egress ACL button, the following page will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-500)
Profile Name
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 8-58 Egress Access Rule Detail Information (IPv4 ACL)
Figure 8-59 Add Egress ACL Profile window (IPv6 ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1 to 500.
Enter a profile name for the profile created.
283
Advertisement
Table of Contents
