Table of Contents
Advertisement
®
xStack
To view the following window, click Management > SNMP Settings > SNMP Community Table Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Community Name
View Name
Access Right
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
SNMP Group Table Settings
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in
the previous window.
To view the following window, click Management > SNMP Settings > SNMP Group Table Settings, as shown
below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 3-39 SNMP Community Table Settings window
Description
Type an alphanumeric string of up to 32 characters that is used to identify members of an
SNMP community. This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
Type an alphanumeric string of up to 32 characters that is used to identify the group of
MIB objects that a remote SNMP manager is allowed to access on the Switch. The view
name must exist in the SNMP View Table.
Read Only – Specifies that SNMP community members using the community string
created can only read the contents of the MIBs on the Switch.
Read Write – Specifies that SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the Switch.
Figure 3-40 SNMP Group Table Settings window
48
Advertisement
Table of Contents
