Identification Of The Inverter Model And Accessories; Inverter Data - WEG CFW100 Programming Manual

6 IDENTIFICATION OF THE INVERTER MODEL AND ACCESSORIES

In order to check the inverter model, see the code on the product nameplate on the side of the inverter.
Once the inverter model identification code is checked, it is necessary to interpret it in order to understand its
meaning. Refer to chapter 2 General Information of the CFW100 user's manual.
Below are the parameters related to the inverter model which change according to the inverter model and version.
Those parameters must comply with the data read on the product identification label.

6.1 INVERTER DATA

P023 – Main Software Version
P024 – Accessory Software Version
Adjustable 0.00 to 99.99
Range:
Properties: ro
Description:
They indicate the software versions of the microprocessors: Main, on the control card C100A-20 and Accessory,
on the accessory connected according to parameter P027.
P027 – Plug-in Module Configuration
Adjustable 0 to 8
Range:
Properties: ro
Description:
This parameter identifies the plug-in which is connected to the control module. The table below presents the
accessories which depend on parameter P027.
Name
-
-
CFW100-IOAR
CFW100-CCAN
CFW100-CBLT
-
CFW100-IOADR
CFW100-IOA
CFW100-IOD
P029 – Power Hardware Configuration
Adjustable Dig. 1 = Rated Voltage
Range: Dig. 2 = Rated Current
Dig. 3 = Gate Driver
Properties: ro
Identification of the Inverter Model and Accessories
Table 6.1: Identification of the plug-in modules of the CFW100
Description
No plug-in module connected.
Reserved.
Accessory for expansion of IOs: 1 relay output + 1 analog input.
Accessory with communication CANopen and DeviceNet.
Bluetooth communication accessory.
Reserved.
Accessory for IO expansion: 1 NTC sensor input + 1 analog input + 3
relay output + 1 input for infrared receiver.
Accessory for IO expansion: 1 analog input + 1 analog output.
Accessory for IO expansion: 4 digital inputs (NPN/PNP).
Return Advance
Factory
Setting:
Factory
Setting:
P027
0
1
2
3
4
5
6
7
8
Factory According
Setting: to inverter
model
CFW100 | 6-1
6