WEG CFW100 Programming Manual page 33

P842 – Quick View 1 IR
P843 – Quick View 2 IR
Adjustable 0 to 999
Range:
Properties:
Description:
These parameters define which parameters (their respective values) will be viewed on the screen (
infrared remote control (available with the accessory CFW100-IOADR).
For further details, refer to the Installation, Configuration and Operation Guide of the CFW100-IOADR I/O
Expansion Module.
P200 – Password
Adjustable 0 = Inactive
Range: 1 = Active
2 to 9999 = New Password
Properties:
cfg
Description:
It allows activating the password (by inserting a new value) or disabling it. For further details regarding the use
of this parameter, refer to Table 5.1 on page
Action
1. Set P200 with the desired value for the password (P200 = password).
Activate password 2. The setting is completed, the new password is active and P200 is automatically adjusted for 1 (password
1. Set the current value of the password (P000 = password).
2. Set the desired value for the new password in P200 (P200 = new password).
Change password
3. The setting is completed, the new password is active and P200 is automatically adjusted for 1 (password
1. Set the current value of the password (P000 = password).
Disable password 2. Set inactive password (P200 = 0).
3. The setting is completed, the password is disabled
1. Activate a factory default by means of P204.
Disable password
2. The setting is completed, the password is disabled
Notes:
(1) It only allows changing the content of the parameters when P000 is equal to the value of the password.
(2) It is allowed to change the content of the parameters and P000 is inaccessible.
5-3.
Table 5.1: Required procedure for each kind of action
active) .
(1)
active) .
(1)
Return
Programming Basic Instructions
Procedure
.
(2)
.
(2)
Advance
Factory P842 = 2
Setting:
P843 = 375
) of the
Factory 0
Setting:
CFW100 | 5-3
5