WEG CFW100 Programming Manual page 56

Available Motor Control Types
P397 – Slip Compensation during the Regeneration
Adjustable
Range:
Properties:
Description:
It enables or disables the slip compensation during the regeneration of the VVW control mode.
The regeneration is an operating mode of the inverter which occurs when the power flux goes from the motor
to the inverter. Setting P397 = 0 allows the slip compensation to be turned off in this situation. This option is
particularly useful when the compensation during the motor deceleration is necessary. Refer to parameter P138
in section 9.1 PARAMETERIZATION OF THE V/f SCALAR CONTROL on page 9-3
compensation.
8
8-2 | CFW100
0 = Inactive
1 = Active
cfg
Return Advance
Factory 1
Setting:
for further details on slip