Keypad (Hmi) And Basic Programming; Use Of The Keypad To Operate The Inverter; Indications On The Hmi Display - WEG CFW100 User Manual

4 KEYPAD (HMI) AND BASIC PROGRAMMING

4.1 USE OF THE KEYPAD TO OPERATE THE INVERTER

Through the HMI, it is possible to command the inverter, visualize and adjust all of its parameters.
The Keypad features the following functions:
Selects (toggles)
display between the
parameter number
and its value (position/
content).

4.2 INDICATIONS ON THE HMI DISPLAY

Direction of
rotation
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Decreases the
frequency, parameter
number or parameter
value.
Inverter status
Main display
Figure 4.2: Display areas
Keypad (HMI) and Basic Programming
Increases the
frequency, parameter
number and parameter
value.
Figure 4.1: HMI keys
Enables/disables the inverter via
acceleration/deceleration ramp
(start/stop, according to P229).
Resets the inverter after a fault
event.
Unit of measurement
(it refers to the value
of the main display)
Bar to monitor
the variable