L2 Features > L2 Multicast Control > Mld Snooping > Mld Snooping Setting - D-Link DMS-1100-10TS User Manual

Figure 4.92 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Statistics Settings
The fields that can be configured for IGMP Snooping Statistics Settings are displayed below:
Item
Statistics
VID (1-4094)
Click the Clear button to clear the IGMP snooping related statistics.
The fields that can be configured for IGMP Snooping Statistics Table are displayed below:
Item
Find Type
VID (1-4094)
Click the Find button to locate a specific entry based on the information entered.
Click the Find All button to view all the entries.
L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Setting
The MLD Snooping Settings page allows user to configure the MLD snooping settings.
Figure 4.93 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Setting
Description
Select the interface to be cleared. The options are All and VLAN.
Enter the VLAN ID.
Table 4.63
Description
Select the interface to be searched. The options are VLAN and Port.
Enter the VLAN ID.
Table 4.64
73
D-Link DMS-1100 Series User Manual